View ISL9R2480G2_1257734.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ISL9R2480G2
P RE LIMINARY
Data Sheet
November 2000
File Number
5005
24A, 800V StealthTM Diode
The ISL9R2480G2 is a StealthTM diode optimized for low loss performance in high frequency applications. The Stealth family exhibits low reverse recovery current (IRRM) and exceptionally soft recovery under typical operating conditions. This device is intended for use as a free wheeling or boost diode in power supplies and other power switching applications. The low IRRM and short ta phase reduce loss in switching transistors. The soft recovery minimizes ringing, expanding the range of conditions under which the diode may be operated without the use of additional snubber circuitry. Formerly developmental type TA49392.
Features
* Soft Recovery. . . . . . . . . . . . . . . . . . . . . . . . . . tb / ta > 1.2 * Fast Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . trr < 35ns * Operating Temperature . . . . . . . . . . . . . . . . . . . . . . 175oC * Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800V
Applications
* Switch Mode Power Supplies * PFC Boost Diode * UPS Free Wheeling Diode * Motor Drive FWD * SMPS FWD * Snubber Diode
Ordering Information
PART NUMBER ISL9R2480G2 PACKAGE TO-247 BRAND R2480G2
Packaging
JEDEC STYLE 2 LEAD TO-247
ANODE
NOTE: When ordering, use the entire part number.
Symbol
K
CATHODE CATHODE (BOTTOM SIDE METAL)
A
Absolute Maximum Ratings
TC = 25oC, Unless Otherwise Specified UNITS
Peak Repetitive Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRRM Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VRWM DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VR Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IF(AV) Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFRM (Square Wave, 20kHz) Nonrepetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IFSM (Halfwave 1 Phase 60Hz) Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TSTG, TJ
800 800 800 24 48 240 160 -55 to 175
V V V A A A W
oC
(c)2001 Fairchild Semiconductor Corporation
ISL9R2480G2 Rev. A
ISL9R2480G2
Electrical Specifications
SYMBOL BV VF IR = 1mA IF = 24A IF = 24A, TC = 125oC IR VR = 600V VR = 600V, TC = 125oC trr IF = 1A, dIF/dt = 100A/s, VR = 30V IF = 24A, dIF/dt = 100A/s, VR = 30V trr IRRM QRR trr S IRRM QRR trr S IRRM QRR dIM/dt CJ RJC DEFINITIONS BV = Breakdown Voltage. VF = Instantaneous forward voltage (pw = 300s, D = 2%). IR = Instantaneous reverse current. trr = Reverse recovery time (ta + tb). IRRM = Maximum reverse recovery current. QRR = Reverse recovery charge. S = Softness factor (tb / ta). dIM/dt = Maximum di/dt during tb. CJ = Junction Capacitance. RJC = Thermal resistance junction to case. pw = pulse width. D = Duty cycle VR = 10V, IF = 0A IF = 24A, dIF/dt = 900A/s, VR = 520V, TC = 125oC IF = 24A, dIF/dt = 200A/s, VR = 520V, TC = 125oC IF = 24A, dIF/dt = 200A/s, VR = 520V, TC = 25oC TC = 25oC, Unless Otherwise Specified TEST CONDITION MIN 800 TYP 2.5 2.0 27 34 35 4.2 75 145 3.8 5.0 500 72 1.96 17.3 710 600 95 MAX 3.0 2.5 100 1.0 35 45 0.92 A nC A/s pF
oC/W
UNITS V V V A mA ns ns ns A nC ns
A nC ns
(c)2001 Fairchild Semiconductor Corporation
ISL9R2480G2 Rev. A
ISL9R2480G2 TO-247
2 LEAD JEDEC STYLE TO-247 PLASTIC PACKAGE (FOR RECTIFIERS ONLY)
E A OS Q OR D TERM. 3 OP
INCHES SYMBOL A b b1 c D E MIN 0.180 0.046 0.060 0.020 0.800 0.605 MAX 0.190 0.051 0.070 0.026 0.820 0.625
MILLIMETERS MIN 4.58 1.17 1.53 0.51 20.32 15.37 MAX 4.82 1.29 1.77 0.66 20.82 15.87 NOTES 2, 3 1, 2 1, 2, 3 4 5 1 -
L1 L
b1 c b
1 2 2 J1 1 BACK VIEW
e1 J1 L L1 OP Q OR OS
0.438 BSC 0.090 0.620 0.145 0.138 0.210 0.195 0.260 0.105 0.640 0.155 0.144 0.220 0.205 0.270
11.12 BSC 2.29 15.75 3.69 3.51 5.34 4.96 6.61 2.66 16.25 3.93 3.65 5.58 5.20 6.85
e1
NOTES: 1. Lead dimension and finish uncontrolled in L1. 2. Lead dimension (without solder). 3. Add typically 0.002 inches (0.05mm) for solder coating. 4. Position of lead to be measured 0.250 inches (6.35mm) from bottom of dimension D. 5. Position of lead to be measured 0.100 inches (2.54mm) from bottom of dimension D. 6. Controlling dimension: Inch. 7. Revision 2 dated 12-93.
(c)2001 Fairchild Semiconductor Corporation
ISL9R2480G2 Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM
DISCLAIMER
FAST FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM
PACMANTM POPTM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM Star* PowerTM StealthTM
SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM UltraFETTM VCXTM
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. H

▲Up To Search▲

Price & Availability of ISL9R2480G2

	To Download ISL9R2480G2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .